Advanced Materials (Research Lab)
High Purity Germanium Detector
High Purity Germanium Detector (HPGD) is the only radiation detection technology that provides sufficient information to accurately and reliably identify radionuclides from their passive gamma ray emissions.
Metallurgical Microscope
Optika B-510MET Trinocular Metallurgical Microscope, 500x, IOS PLAN MET, Incident Light, Multi-plug.
Metallography is the study of the physical structure and components of metals, by using microscopy. Many different microscopy techniques are used in metallographic analysis. Prepared specimens should be examined with the unaided eye after etching to detect any visible areas that have responded to the etchant differently from the norm as a guide to where microscopical examination should be employed. Light optical microscopy (LOM) examination should always be performed prior to any electron metallographic (EM) technique, as these are more time-consuming to perform and the instruments are much more expensive.
Further, certain features can be best observed with the LOM, e.g., the natural color of a constituent can be seen with the LOM but not with EM systems. Also, image contrast of microstructures at relatively low magnifications.
MATERIAL SCIENCE / METALLOGRAPHY
Reflected light microscopy is the method for observation of specimens that remain opaque even when ground to a thickness of few microns. The range of specimens falling into this category is incredibly wide and includes most metals, ores, ceramics, many polymers, semiconductors (unprocessed silicon, wafers, and integrated circuits), coal, plastics, paint, paper, wood, leather, glass inclusions, and a wide variety of specific materials.
Centrifuge
High-speed mini-centrifuge Microspin 12 is a compact desktop centrifuge designed for biomedical laboratories.
Microspin 12 is used for extracting RNA/DNA samples, sedimentation of biological components, biochemical and chemical analysis of microsamples.
A display simultaneously shows actual and set values for:
Speed control range: 1000 - 14500 rpm
Relative centrifugal force.
A brushless motor provides noiseless performance at the maximal speed and long service life. An angular rotor is designed for accommodation of 12 Eppendorf microtubes and spin columns. The rotor is made of aluminium, it is equipped with fixing lid and included in the standard specification of the centrifuge. Constant airflow around the rotor reduces risk of samples overheating during operation.
Metal protective inserts inside the casing and lid, automatic imbalance switch-off and locking of a lid provide safe operation. Completion of centrifugation is indicated by a sound signal.
The external power supply unit allows operation of Microspin 12 in cold rooms (at ambient temperatures from +4°C to +40°C).
Standard set:
Built-in rotor MSR-12 (12 places for microtubes 1.5/2 ml) with protection lid MSL-SC and adapters A-02, A-05
12 places for microtubes 1.5/2 ml
A-02 adapter 12 pieces for microtubes 0.2 ml
A-05 adapter 12 pieces for microtubes 0.5 ml
Microspin 12 is used for extracting RNA/DNA samples, sedimentation of biological components, biochemical and chemical analysis of microsamples.
A display simultaneously shows actual and set values for:
Speed control range: 1000 - 14500 rpm
Relative centrifugal force.
A brushless motor provides noiseless performance at the maximal speed and long service life. An angular rotor is designed for accommodation of 12 Eppendorf microtubes and spin columns. The rotor is made of aluminium, it is equipped with fixing lid and included in the standard specification of the centrifuge. Constant airflow around the rotor reduces risk of samples overheating during operation.
Metal protective inserts inside the casing and lid, automatic imbalance switch-off and locking of a lid provide safe operation. Completion of centrifugation is indicated by a sound signal.
The external power supply unit allows operation of Microspin 12 in cold rooms (at ambient temperatures from +4°C to +40°C).
Standard set:
Built-in rotor MSR-12 (12 places for microtubes 1.5/2 ml) with protection lid MSL-SC and adapters A-02, A-05
12 places for microtubes 1.5/2 ml
A-02 adapter 12 pieces for microtubes 0.2 ml
A-05 adapter 12 pieces for microtubes 0.5 ml
UV-Vis Spectrophotometer
Thermo Scientific™ GENESYS™ 50 UV-Vis Spectrophotometer PROMO.
Perform routine measurements for quality control or teaching in the chemistry classroom with the rugged Thermo Scientific™ GENESYS™ 50 UV-Visible Spectrophotometer. Offered in a single cell configuration, these instruments are designed with a sloping surface to shed spills and a washable sampling compartment for easy clean up. A 7-inch touchscreen interface, local control software (no PC needed) and optional Wi-Fi networking make the GENESYS 50 UV-Vis Spectrophotometer the ideal choice for daily sampling purposes.
Features:
Wavelength Range: 190 to 1100 nm
7-inch high-resolution touchscreen user interface
Local control for speed and reliability
Networking capable (Wi-Fi adaptor available)
Large sample compartment with front access
Designed for:
Chemistry labs
Routine measurements
Moderate throughput requirements
Muffle Furnace
SNOL 6,7/1300 LSM01.
The high-accuracy electric muffle furnace SNOL 6.7/1300 is a universal laboratory furnace capable of reaching temperatures up to 1300°C. It is designed for material testing and heat treatment processes such as hardening, annealing, normalizing, and treating ceramic and stoneware samples. To eliminate gases or smoke released during thermal processing, an exhaust system may be additionally installed. The furnace is an excellent fit for scientific laboratories, educational institutions, ceramic studios, medical applications, and industrial use.
Incubator
Memmert IN30.
Working temperature range: at least 5 above ambient temperature to +80 °C
Precision Balance
Ohaus PR223/E - 220g x 0.001 g Precision Balance
YouTube video: click here
Maximum Capacity: 220 g
Readability: 0.001 g
Pan Size: 120 mm
Net Weight: 4.5 kg
Pan Construction: Stainless Steel
Power AC Adapter (Included)
Stabilization Time: 2 s
Tare Range: To capacity by subtraction
Units of Measurement: Milligram; Gram; Ounce; Pound; Carat; Pennyweight; Ounce Troy; Newton; Grain
Working Environment: 10°C – 30°C, 80%RH, non-condensing; 10°C – 40°C, 80%RH, non-condensing
Magnetic stirrer with hotplate MSH-D digital, up to 380°C, 80-1,500 rpm
Features:
up to 380°C
shade motor for 80-1,500 rpm
digital display with backlight
ceramic-coated aluminium plate 180x180 / 260x260 mm
heat-, chemical- and restricted acid-resistant
no liquid can get into the body
powder-coated body
easy to clean
30 mm stirrer bar included
CE certified and unique serial number for tracing
Safety mechanism:
timer 99h 59min with timer-end signal
error status
locking mode
operation LEDs
Micrometers
Outside Micrometer provide an level of protection against coolant, water, chips, dirt, dust and other contaminants in hostile shop environments. Ability to zero tool at any position as well as retain and return to the true zero reading of the micrometer.
Insize has the quality products made to international standards with full guarantee. Innovation by continually striving to improve and develop new products. Service and support to ensure you have trouble-free use of our products. High performance products at a good price.